It is the question that decides whether a quote is worth requesting at all: will a 5kW system even fit on my roof? You can get a reliable answer yourself in about five minutes with a measuring tape.
The short answer
A 5kW rooftop system needs roughly 350 to 500 square feet of shadow-free roof.
That is a wide range, and the reason it is wide matters more than the number itself.
Why the range is so broad
Panel output has climbed steadily. A system built from 330 W panels needs about 15 panels to reach 5kW. The same 5kW built from 550 W panels needs 9. Fewer, larger panels occupy noticeably less roof for the same output.
Mounting matters too. Panels laid flat against a sloped roof use the least area. Panels on a tilted frame on a flat terrace need gaps between rows so one row does not shade the next — which can add 30–40% to the footprint.
So the honest version of the answer is: a 5kW system needs 350–500 sq ft, depending on panel wattage and whether your roof is sloped or flat.
Measuring your own roof
You are not measuring the whole roof. You are measuring the part that is genuinely usable.
- Measure the clear rectangle. Length times breadth of the largest uninterrupted area.
- Subtract the obstacles. Water tanks, stairwell housing, vents, dish antennas, air-conditioner units — and the space around them, not just their footprint.
- Walk it at 10am and again at 3pm. Note anything casting a shadow: a parapet wall, a neighbour's building, a tree. Shade is the single biggest destroyer of solar output, and a shadow across one panel can drag down a whole string.
- Check the roof itself. Panels last 25 years. If the waterproofing is due for attention, do it before the system goes up, not after.
What is left after those four steps is your usable area.
Rough sizing guide
| System size | Usable roof needed | Typically suits |
|---|---|---|
| 2kW | 140–200 sq ft | Small flat, modest usage |
| 3kW | 210–300 sq ft | Average family home |
| 5kW | 350–500 sq ft | Larger home, some air conditioning |
| 10kW | 700–1,000 sq ft | Bungalow or small commercial |
Use these to sense-check feasibility, not to place an order. Final sizing should follow your actual electricity consumption, not your roof area — there is no point installing 10kW if you consume 3kW worth.
Roof smaller than you hoped?
- Higher-wattage panels. Fewer panels, same output, less area. They cost more per panel but can be what makes a constrained roof work.
- An elevated structure. Raising panels on a frame above a terrace keeps the space beneath usable — for drying clothes, storage, or simply walking around.
- Size to your bill, not your roof. Most homes need less than they assume. A system covering 80% of your consumption is usually the better economic choice than one covering 100%.
Let us measure it properly
Our survey takes about thirty minutes. We measure the usable area, track shadow through the day, check the roof structure, and look at your last twelve months of bills — then tell you what actually fits and what it will generate.
Residential rooftop solar · Ground mounted systems · Book a free site survey